Blog Archives - Page 44 of 76 - Law Abiding Biker Podcast

Video Review-Wireless Headset Interface Module-WHIM-Harley Bluetooth Headset-Boom Box Infotainment

August 31, 2017 By Ryan Urlacher 19 Comments

Review-The Harley Wireless Headset Interface Module (WHIM) is now available for '14-later Touring and Trike models equipped with Boom! Audio 6.5GT Radios, this Wireless Headset Interface Module (WHIM) lets you communicate with your bike without being wired to it. The WHIM Bluetooth adapter permits wireless connectivity to the 6.5GT Infotainment system, allowing you to communicate via CB radio, hear turn-by-turn GPS directions, listen to your favorite radio stations and so much more all through your Bluetooth®-enabled headset.

NOTE: You will have to take your Harley to a dealership to get your Boom Box flashed after install of the module and harness. Only Harley dealerships have this proprietary software. And, some dealerships will charge you.

SHOP FOR SENA BLUETOOTH PRODUCTS OR BIKER BOOM IMC WIRED HEADSETS IN OUR STORE

SENA FREEWIRE HERE

BIKER BOOM IMC WIRED HEADSETS

GET OUR BOOM BOX TUTORIAL VIDEOS HERE

Harley Headset Interface Module Information & Part Numbers

HARLEY WIRELESS HEADSET INTERFACE MODULE PART #76000768

HARLEY WIRELESS HEADSET INTERFACT MODULE HARNESS PART #69201726

Join the Free Email Club!

If you appreciate this free information make sure to join the thousands of law abiding bikers that have already joined the free Email Club! You will be notified of new useful motorcycle content and techniques as we put them out. Join the Community now!

Harley Boom Box Software Update Version 1.21.2.1-Siri Fixes? | VLOG-48

August 30, 2017 By Ryan Urlacher 4 Comments

See ALL Official Boom!™ Box Tutorial Videos!

-Join the thousands of bikers that are no longer stressing!

Videos By Bikers For Bikers

CHECK THEM OUT NOW!

If you want to stay up to date on all Harley Davidson Boom!™ Box updates and issues then subscribe to the free Law Abiding Biker Email list below:

Harley Davidson and Harman Kardon just released Boom!™ Box software update version 1.21.2.1 on August 7, 2017. This comes after software update versions 1.21.0.4 that was released in March 2017. We have received many inquiries from bikers asking if they should update to this latest version. It is always a good idea to wait and see if an update fixes more than it breaks and let me have some time to test things.

Note: This particular update if for the Boom Box 4.3 Standard, 6.5T Premium, and the CVO 6.5GT systems. I give the go ahead to update to this new Boom Box software update version, 1.21.2.1.

I installed and tested this update for you. As usual, don't expect any miracles and that suddenly all things will be fixed for ever user. They still have a long way to go to get rid of all the problems that persist with the Harley Boom!™ Box Infotainment System. We are all skeptical that they'll ever get the Boom Box working perfectly at this point.

FAQ:

Question: If I get behind on updating my Boom Box software, will I have to go back and install each past update I missed?

Answer: No, you do not have to update incrementally. If you get behind, just grab the latest software update here and install it. It will update everything you need including past updates. There is no access to the older updates from the Harley website anyway.

Question: If I update my Boom Box to the newest software version and don't like it or it brakes things, am I stuck with it?

Answer: No, as long as you have been saving each Boom Box update file somewhere you're fine. You can go to a past software update file and install that over the new update version (downgrade). Keep all software versions and updates as Harley does not post or give access to older versions.

Resources & videos:

Remember; The Harley Boom!™ Box still has many annoying bugs and problems, so don't expect this software update to suddenly fix everything.

If you don't know how to properly update your system software and maps then check out my Official Boom!™ Box Software Update Video.

This update claims to fix the following: (1.21.2.1)

Issues Fixed:

Date Released: 08/07/2017

Fixes

Siri not initiating in some instances with long press of VR (Voice recognition) button
VR cancelling Siri initiation despite activation through button press.
VR initializes prior to Siri initiation.
Global presets from USB device grayed out in display despite USB device plugged in.
Global presets are highlighted even after USB device is removed.
Scroll down button selects last item in media list in some instances.
Squelch pop up not shown properly in all instances after squelch button activation.
Map database names in some international regions were not fully displayed.
Next turn shown on weather map in some instances.
Various bug fixes.

Download Update

Note: If you aren't using Harley Davidson's Ride Planner to integrate with your Boom!™ Box system then you are [Read more…]

Filming Harley-Davidson Milwaukee-Eight Service, Oil Change & Safety Inspection

August 30, 2017 By Ryan Urlacher 3 Comments

We are filming a routine service, oil change, and safety inspection on a Harley-Davidson with a Milwaukee-Eight motor. It doesn’t matter if you have the 107 ci or 114 ci engine as the service is the same. It doesn't matter what model you have as what we teach you is the same. We are going to show you exactly what the Harley dealerships do and charge you $300 to $400 for every 5k miles. We are going to show you even more than they actually do.

The best part is you’ll have the pure satisfaction of wrenching on your own Harley right in your very own shop or garage. You’ll know things were done right. It's a great feeling!!

You’ll save a ton of money by doing these simple services yourself.

I hope to have the official video edited and released in a month or so. Stay tuned and subscribe to this channel!!

**CHECK HERE TO SEE IF OUR NEW MILWAUKEE-EIGHT OIL CHANGE/SAFETY INSPECTION VIDEO HAS BEEN RELEASED

LINKS DISCUSSED IN THIS VIDEO:

OUR PREVIOUS HARLEY OIL CHANGE AND MAINTENANCE VIDEOS: PRE-MILWAUKEE-EIGHT

BIKER GRIPPER CELL PHONE MOTORCYCLE MOUNT

GET CIRO 3D FANG LED SIGNAL LIGHT INSERTS HERE

CIRO VISION X LED HEADLIGHT

CHECK OUT ALL OUR HELPFUL FOR PURCHASE VIDEOS

CHECK OUT OUR OFFICIAL STORE HERE

Join the Free Email Club!

Video-Install New Motorcycle Wheel Bearings-In Your Garage-DIY Tutorial

August 23, 2017 By Ryan Urlacher 4 Comments

Video-In this completely free video, we show you how to install new wheel bearings in your motorcycle wheel right in your very own shop or garage. No need for an expensive wheel bearing press. You can use a piece of 2×4, butane torch, grease, and hammer. Why pay a shop or dealership to install your motorcycle wheel bearings when it's simple to do yourself after you watch this video?

We show you all the tips and tricks to make sure you're successful.

SUPPORT US AND SHOP IN THE OFFICIAL LAW ABIDING BIKER STORE!

We were actually changing the old spoked wheels out for new cast aluminum wheels on a 2001 Harley-Davidson Road King. The wheel kit we purchased from Harley-Davidson came with new bearings that needed to be installed.

Note: We already have free videos on how to remove your front and rear wheel from your Harley-Davidson motorcycle.

VIDEOS OF INTEREST:

SUPPORT US AND CHECK OUT OUR AWESOME MOTORCYCLE TUTORIAL VIDEOS!

If you appreciate the content we put out and want to make sure it keeps on coming your way then become a Patron too! There are benefits and there is no risk.

Support us via a flat donation:

Join the Free Email Club!

Video-How to Adjust a Harley Clutch Internally & Clutch Cable | Complete Guide

August 16, 2017 By Ryan Urlacher Leave a Comment

Video-In this completely free DIY video we show you how to adjust your Harley-Davidson clutch internally. We'll also give you a good look behind the primary cover. You actually only need to remove your clutch inspection cover to adjust the clutch, but we wanted to give you a better angle, so in the video, we had the entire primary cover off.

We then show you how to follow up and adjust the clutch lever cable on your Harley-Davidson. This video will show you start to finish how to adjust your Harley clutch and to get it right where you want it. We give you all the tips and tricks needed for this project. No specialty tools are required for this project.

Note: This is for cable clutch Harley models. There are no adjustments on a newer hydraulic Harley clutch.

Save yourself a ton of money by not having to take your Harley to the dealership to have these types of projects done. You can do this right in your very own shop or garage and right on the kickstand. Plus, have the absolute satisfaction of wrenching on your own Harley!

==> CHECK OUT ALL OUR FREE YOUTUBE VIDEOS HERE

==> CHECK OUT ALL OUR FOR PURCHASE VIDEOS HERE

If you appreciate the content we put out and want to make sure it keeps on coming your way then become a Patron too! There are benefits and there is no risk.

If you appreciate this free video and information then please purchase any products using our below affiliate links.
(no additional cost to you, but it helps support us).

Revzilla | J&P Cycles | Amazon

Join the Free Email Club!

VIDEO-Harley-Davidson Milwaukee-Eight | How to Perform Routine Maintenance & Oil Change-2017 to Present Models

August 9, 2017 By Ryan Urlacher 2 Comments

Start saving money now. Easily learn how to perform routine maintenance, oil change, and safety inspection on your Harley Davidson.
Milwaukee-Eight motor (107 & 114 ci)
Do it in your garage or on your patio right on the kickstand! No specialty tools or jacks required.
GET OUR PRE-MILWAUKEE-EIGHT HARLEY OIL CHANGE, SERVICE, & SAFETY INSPECTION VIDEO HERE!

A Video by Bikers for Bikers!

Information About our Harley Maintenance Video

Immediately stream any purchased video on your desktop, laptop, smartphone, or tablet. View them as many times as you like for life. Just like a YouTube video!

Milwaukee Eight Service Live Art copy ART copy

An easy to follow step-by-step tutorial video.

CHECK IT OUT!

I GUARANTEE YOU CAN DO IT!

CHECK THEM OUT!

See Other Useful For Purchase Videos

In this tutorial video, we teach you how to perform routine maintenance, oil change, and safety inspection on your Harley Davidson equipped with a Milwaukee-Eight 107 or 114 ci motor. It doesn't matter which model Milwaukee-Eight Harley you have. What we teach you is universal across the entire Milwaukee-Eight line. You can do this right in your very own shop or garage and no specialty tools are required.

Note: You can get our Harley PRE-Milwaukee-Eight Oil Change, Service, & Safety Inspection Video Here!

What years & makes will this video work for exactly?

The video is good for Harley-Davidson Milwaukee-Eight 107 (1,750cc) and 114 (1,870cc) CI motors & CVO models. The Milwaukee-Eight motors, oil plugs, air filters, oil filters, frames, brakes, belts, levers, and other components are basically the same for the all these models:
All Harley models with the Milwaukee-Eight 107 & 114 ci motor.
Single & Twin-Cooled Milwaukee-Eight 107 & 114 ci motors
CVO Models with the 107 & 114 ci motor

Get our PRE-Milwaukee-Eight Harley-Davidson Oil Change & Maintenance Video Here!

Servicing your Harley Davidson yourself DOES NOT void your warranty in any way and that is a FACT! We have spoken directly to many Harley Davidson Service Managers and Mechanics over the years and nothing has changed.There are a couple of items you need to retain to keep your warranty in tact and this is discussed within. You are protected by the Magnuson-Moss Warranty Act.

Much effort & detail went into the filming & producing this video to give you the best possible views. You simply will not find a more detailed instructional video out there on this topic. We also give you some extra info and talk about other Harley related mechanical things in this video.

Harley Davidson Dealerships charge $300 plus for this basic service and easy safety inspection every 5,000 miles. To do this service yourself, all you need is this video, synthetic oil, and oil filter that costs between $100-$125. Then all you need is 1 hour of your time and you are done!

Now, imagine all the time and money you will save by not taking your motorcycle to the dealership every 5,000 miles and paying $300 plus for something you can easily do for much cheaper at your home.

For the low price of this video, you will be saving several thousands of dollars over the life of your Harley! Then you can put that money back into something worthwhile, like parts to dress up your Harley-right?-LOL

You don't need any real fancy tools, jack, or motorcycle lift for this. You can do this service and safety inspection right on the kickstand. We have done it this way for many years and serviced many Harley's. Here is a list of the simple tools you will need:

* Small Standard Screwdriver

* 3/8″ Ratchet

* 1/4″ Ratchet

* 3″ Extension for 3/8″ Ratchet

* 5/8″ Standard Socket

* 3/8″ Hex Socket for 3/8″ Ratchet (or just a Hex Drive Tool)

* 5/16″ Hex Socket for 3/8″ Ratchet (or just a Hex Drive Tool)

* Torx Drive Tool w/ size T-27 (or a Torx Socket for a 1/4″ Ratchet)

* Multi type Torx Tool w/ size T-27

* Oil Filter Removal Wrench w/ Cutout-Here is the part description and Harley part number (End Cap Oil Filter Wrench-94863-10)($10.95)

* Oil Drain Pan

* Funnel

Further, we talk about specification and capacities and break it down for you and for real life applications. We keep it simple, as it does not need to be difficult. This is really an easy thing to do! You will be kicking yourself for wasting money and wondering why you never did it yourself before.

There are no surprises in this video and we are completely confident you will be able to service your Harley Davidson completely on you own after viewing this video. We truly hope it helps many Harley-Davidson owners save a ton of money and discover the joys of wrenching on their own bike!

So what are you waiting for? Get the video NOW and stop wasting your hard earned money! Tell other riders and friends about this video.

If you're new to Law Abiding Biker™ Media, please check out our YouTube Channel where we have tons of completely free videos to help the biker community. Our mission is to help as many bikers as we possibly can worldwide!

Keep the rubber side down and the shiny side up! Ride

An easy to follow step-by-step tutorial video.

CHECK IT OUT!

Video-Changing Your Own Harley Tire In Your Garage-DIY

August 5, 2017 By Ryan Urlacher 2 Comments

We are Live showing you how we are removing a tire from a Harley motorcycle rim ourselves right in our own garage. No need to pay a dealership or shop to do this. With a simple manual tire removing device you too can easily remove and install your own tires on your Harley motorcycle rim. We are filming this and will show you all the tips and tricks in an upcoming release on this channel, so make sure you're subscribed.

We are also putting new wheel bearings in both the front and back of a Harley wheel/rim. Yes, we are filming this too and it will be an upcoming release on this channel.

SUPPORT US-BECOME A PATRON MEMBER AND GET BENEFITS

SHOP IN OUR OFFICIAL STORE

CHECK OUT OUR AWESOME FOR PURCHASE TUTORIAL VIDEOS

LEAVE A FLAT DONATION