Review Archives - Page 28 of 39 - Law Abiding Biker Podcast

Video-Sound Comparison-Vance & Hines Dresser Duals-Titan 450 OS Mufflers vs. Stock Exhaust-Milwaukee-Eight

December 23, 2017 By Ryan Urlacher Leave a Comment

In this video, we give you a sound comparison between stock Harley-Davidson exhaust headers/mufflers & Vance & Hines Dresser Duals with Titan 450 OS slip-on mufflers. This provides a very nice sound and increases overall performance on your Harley with a Milwaukee-Eight motor. It also cuts down the heat on the rider. It doesn't matter if you install V&H Dresser Duals or Power Duals as it would sound very similar. Both header systems open things up and eliminate the catalytic converters (cats) that are found in your stock Harley exhaust. You will get much less heat on your legs with the cats gone.

Video of Interest:

Install Exhaust-Headers-Mufflers Harley Milwaukee-Eight Touring-Vance & Hines Dresser Duals

GET VANCE & HINES PIPES AND MUFFLER IN OUR STORE! SUPPORT US!

The Vance & Hines Dresser Dual head pipes are two separate pipes all the way from the heads to the rear. There is no chamber, so the back pressure is just not there. It's well known that true duals are not the number one choice for optimal performance anyway. They look great and sound good though. And most riders would not feel a noticeable loss of performance with this set up. These pipes only come with 18mm O2 port that can be reduced to 12mm with the provided hardware, which is great because you can use your stock Harley O2 sensors.

CHECK OUT OUR OFFICIAL STORE AND SUPPORT US!

SUPPORT US AND CHECK OUT OUR AWESOME MOTORCYCLE TUTORIAL VIDEOS!

CHECK OUT OUR HUNDREDS OF FREE HELPFUL VIDEOS ON OUR YOUTUBE CHANNEL AND SUBSCRIBE!

Join the Free Email Club!

If you appreciate this free information make sure to join the thousands of law abiding bikers that have already joined the free Email Club! You will be notified of new useful motorcycle content and techniques as we put them out. Join the Community now!

Video-Install Exhaust-Headers-Mufflers Harley Milwaukee-Eight Touring-Vance & Hines Dresser Duals

December 22, 2017 By Ryan Urlacher Leave a Comment

We show you how to install Vance & Hines Dresser Dual head pipes and Titan 450 OS Slip-on mufflers on a Harley-Davidson touring with a Milwaukee-Eight 107 & 114 motor. We do a sound comparison at the end between stock Harley Exhaust vs. the new V&H exhaust. We also do a full review of these Vance & Hines pipes and headers.

GET VANCE & HINES PIPES AND MUFFLER IN OUR STORE! SUPPORT US!

This header system gets rid of your catalytic converter (cat), opening up the flow, increasing power & sound, & greatly reducing heat on the rider. Cats create a large amount of heat.

After install, we noticed a definite increase in performance over the stock Harley pipes and mufflers. We noticed a great improvement in sound and the reduction of heat from having no cats.

Remapping your motorcycle's Electronic Fuel Injection (EFI) is necessary when you change the flow of exhaust or air intake on your Harley, such as we did in these exhaust installs. Make it easy and get a V&H Fuelpak 3 Electronic Fuel Injection Tuner from our store. We highly recommend this EFI tuner and we use it heavily here at Law Abiding Biker™ Media.

PURCHASE VANCE & HINES EXHAUST RIGHT IN OUR OFFICIAL STORE HERE!

SUPPORT US AND CHECK OUT OUR AWESOME MOTORCYCLE TUTORIAL VIDEOS!

CHECK OUT OUR HUNDREDS OF FREE HELPFUL VIDEOS ON OUR YOUTUBE CHANNEL AND SUBSCRIBE!

Join the Free Email Club!

Video-How to Install & Wire Ciro 3D Filler Panel LED Lights on Harley

November 24, 2017 By Ryan Urlacher 2 Comments

By Bikers For Bikers!

In this completely free tutorial video, we show you how to install Ciro 3D Filler Panel LED run/brake/signals on your Harley-Davidson touring motorcycle. From the install to getting everything plugged in correctly, we have you covered.

SUPPORT US AND GET CIRO 3D PRODUCTS RIGHT IN OUR OFFICIAL ONLINE STORE!

The new Ciro Filler Panel LED Lights complete the rear end of your Harley touring model by adding red running/brake lights and amber turn signals to the stock filler panel area. This part dramatically increases visibility from the rear by incorporating an ultra-bright plasma amber turn signal along with red low-intensity running and high-intensity brake lights.

Ciro 3D filler panel lights are available for Harley Street Glides, Road Glides, Ultras, and Road Kings!

Safety and visibility at the rear of your Harley-Davidson are so very important and Bag Blades can provide that additional lighting that catches the attention of that motorist behind you texting and not paying attention. That's a reality and you may not get a second chance if you get rear-ended on your motorcycle.

Get Ciro 3D Filler Panel Lights in our Official Store:

Mentioned in video for rear brake strobe patterns: (affiliate link)

Custom Dynamics Magic Strobe Brake Light Modulator For Harley Touring

Join the Free Email Club!

Video-How to Install & Wire Ciro 3D Bag Blade LED Lights on Harley

November 13, 2017 By Ryan Urlacher Leave a Comment

By Bikers For Bikers!

In this completely free tutorial video, we show you how to install Ciro 3D Bag Blade LED run/brake/signals on your Harley-Davidson touring motorcycle. From the install to getting everything plugged in correctly, we have you covered.

SUPPORT US AND GET CIRO 3D PRODUCTS RIGHT IN OUR OFFICIAL ONLINE STORE!

The Ciro LED Bag Blades are one of the cleanest ways to add light to the back of your bike. The low profile light housing sits right below the lid of your bag to blend seamlessly into the back of the bike. The Bag Blades® feature super-bright run, brake, and sequential amber turn signals to be sure you are seen day or night.

CLICK ON PRODUCT!

Safety and visibility at the rear of your Harley-Davidson are very important and Bag Blades can provide that additional lighting that catches the attention of that motorist behind you texting and not paying attention. That's a reality and you may not get a second chance if you get rear-ended on your motorcycle.

Mentioned in video for rear brake strobe patterns: (affiliate link)

Custom Dynamics Magic Strobe Brake Light Modulator For Harley Touring

Join the Free Email Club!

Video-How to Install & Wire Ciro 3D Harley Saddlebag Extensions With LED Lights-Chrome or Black

November 10, 2017 By Ryan Urlacher 2 Comments

By Bikers For Bikers!

In this completely free tutorial video, we show you how to install black or chrome Ciro 3D saddlebag extensions with LED run/brake/turn signal lights on your Harley-Davidson touring motorcycle. From the install to getting everything plugged in correctly, we have you covered.

SUPPORT US AND GET CIRO 3D PRODUCTS RIGHT IN OUR OFFICIAL ONLINE STORE!

Give your bike that smooth, lower, custom look with Ciro 3D Saddlebag Extensions. These saddlebag extensions were designed to maintain lean angle clearance so you don’t need to make any compromises in the corners. Manufactured from a similar composite material as your original equipment bags; these extensions are tough and built to last. Increased visibility and style with LED running, turn, and brake lights on the sides and back to make sure you’re seen from all angles.

Safety and visibility at the rear of your Harley-Davidson are so very important and LED Saddlebag Extensions can provide that additional lighting that catches the attention of that motorist behind you texting and not paying attention. That's a reality and you may not get a second chance if you get rear-ended on your motorcycle.

CLICK ON PRODUCT!

Mentioned in video for rear brake strobe patterns: (affiliate link)

Custom Dynamics Magic Strobe Brake Light Modulator For Harley Touring

Join the Free Email Club!

Video-Speed and Strength Go For Broke Armored Hoody Review-Biker

November 1, 2017 By Ryan Urlacher Leave a Comment

The Speed and Strength Go For Broke armored motorcycle hoody is made from a cotton poly blend frame and features removable Vault C.E. approved shoulder, elbow and spine protectors. The shoulder and elbows come reinforced with Dupont Kevlar fiber thread. The hoody boasts zippered pockets, reflective logos for better visibility and belt loops for pants attachment so that the jacket doesn’t ride up.

**Discontinued item now at a great price until out of stock. Check availability below.

Features:

Cotton-poly blend frame
Removable Vault CE approved shoulder and elbow protectors
Removable Vault CE approved spine protector
Shoulder and elbows reinforced with DuPont™ Kevlar® fiber thread
Belt loops for pants attachment
Zippered pockets
Reflective logos

If you appreciate our hard work & you appreciate this website, please consider supporting us by clicking on the image below and making a purchase through our affiliate links! No additional cost to you!

Amazon | Revzilla (out of stock)

Speed and Strength Go For Broke Armored Hoody (Color: Black / Size: 3XL)

Click on Product!

Join the Free Email Club!

Video-Speed and Strength Rust And Redemption Armored Moto Shirt Review-Biker

October 11, 2017 By Ryan Urlacher 2 Comments

The Speed and Strength® Rust and Redemption™ armored moto shirt features a cotton-poly blend frame with a snap down collar and hidden YKK main zipper opening. The shoulders and elbows are reinforced with Dupont™ Kevlar fiber thread with expansion gussets in the shoulders allowing for minimal movement restriction. For your added protection we included Vault™ C.E. Approved Shoulder, Elbow and Spine Protectors.

Features:

Cotton poly blend frame
Removable Vault C.E. approved shoulder and elbow protectors
Removable Vault C.E. approved spine protector
Shoulders and elbows reinforced with DuPont™ Kevlar® fiber thread
Hidden YKK main zipper opening
Snap down collar
Belt loops for pants attachment