Video-In this completely free DIY video we show you how to remove and replace a primary drive auto chain tensioner on a Harley-Davidson motorcycle. The purpose of this device is to keep the appropriate amount of tension on your primary chain and they do fail sometimes. If that happens, you'll know and you'll hear slapping and banging noises in your primary chaincase.

You'll also need to replace the chain tensioner at some point when you get much higher miles on your Harley. We show you how to inspect the friction point where chain rides on the tensioner. You can see the exact auto chain tensioner we used at the bottom of this article.

Yup, we'll show you how to remove your outer primary cover, access the chain tensioner, and remove it. We'll also show you some tips and tricks along the way. Then we show you how to install a new auto chain tensioner.

Note: You'll need a replacement primary cover gasket for this project.

Save yourself a ton of money by not having to take your Harley to the dealership to have these types of projects done. You can do this right in your very own shop or garage and right on the kickstand. Plus, have the absolute satisfaction of wrenching on your own Harley!

==> CHECK OUT ALL OUR FREE YOUTUBE VIDEOS HERE

==> CHECK OUT ALL OUR FOR PURCHASE VIDEOS HERE

==> INSTALL FORWARD CONTROLS ON HARLEY DYNA & SOFTAIL VIDEO

==> COMPLETE HARLEY MAINTENANCE AND OIL CHANGE VIDEO

If you appreciate the content we put out and want to make sure it keeps on coming your way then become a Patron too! There are benefits and there is no risk.

 

 

If you appreciate this free video and information then please purchase any products using our below affiliate links.
(no additional cost to you, but it helps support us).

Adventure Harley | Revzilla | J&P Cycles | Motorcycle Superstore | Amazon

 

Click on Picture to see the exact item we used!