fbpx

Law Abiding Biker Podcast

Motorcycle Biker Podcast, Videos, & Blogs

Harley Davidson Fuel Pump Replacement Tutorial Video

By Leave a Comment

harley fuel pumpIn this completely free video, we show you exactly how to replace the fuel pump on your Harley-Davidson motorcycle. The fuel pump on this 2016 Harley Road Glide was making garbled noises when the ignition was turned on and it could be also be heard while riding down the road, so clearly, it was going bad. With this video, you can do this project yourself right in your own shop or garage. (see video below)

You don't need a motorcycle lift, jack, or any specialty tools to complete this project. Just basic tools are all you need. 

If you appreciate all the free content we put out, please consider supporting us by using our affiliate links below. No additional cost to you and if you do click through and make a purchase we do get a small commission. Thanks in advance. 

Here is another option if the above links show out of stock:

HELP SUPPORT US! JOIN THE BIKER REVOLUTION! #BikerRevolution #LawAbidingBiker

🛒SHOP IN THE LAW ABIDING BIKER STORE 🛒

😎BECOME A MEMBER AND GET BENEFITS 😎

📹GET PREMIUM MOTORCYCLE TUTORIAL VIDEOS 📹

🎬WATCH OUR MOTORCYCLE DOCUMENTARY FILMS HERE🎬

💰LEAVE A FLAT DONATION 💰

🎙CHECK OUT THE WEEKLY PODCAST 🎙

ⓕ FOLLOW US ON FACEBOOK ⓕ

🐦 FOLLOW US ON TWITTER 🐦

📷 FOLLOW US ON INSTAGRAM 📷

Join the Free Email Club!

If you appreciate this free information make sure to join the thousands of law abiding bikers that have already joined the free Email Club! You will be notified of new useful motorcycle content and techniques as we put them out. Join the Community now!

Harley Davidson Fuel Filter Replacement Tutorial Video

By 1 Comment

harley fuel filterIn this completely free video, we show you exactly how to replace the fuel filter on your Harley-Davidson motorcycle. Harley recommends you change the filter every 100,000 miles, but we say you should do it sooner as it's a cheap expense and with this video, you can do it yourself right in your own shop or garage. (see video below)

You don't need a motorcycle lift, jack, or any specialty tools to complete this project. Just basic tools are all you need. 

If you appreciate all the free content we put out, please consider supporting us by using our affiliate links below. No additional cost to you and if you do click through and make a purchase we do get a small commission. Thanks in advance. 

Here is another option if the above links show out of stock:

HELP SUPPORT US! JOIN THE BIKER REVOLUTION! #BikerRevolution #LawAbidingBiker

🛒SHOP IN THE LAW ABIDING BIKER STORE 🛒

😎BECOME A MEMBER AND GET BENEFITS 😎

📹GET PREMIUM MOTORCYCLE TUTORIAL VIDEOS 📹

🎬WATCH OUR MOTORCYCLE DOCUMENTARY FILMS HERE🎬

💰LEAVE A FLAT DONATION 💰

🎙CHECK OUT THE WEEKLY PODCAST 🎙

ⓕ FOLLOW US ON FACEBOOK ⓕ

🐦 FOLLOW US ON TWITTER 🐦

📷 FOLLOW US ON INSTAGRAM 📷

Join the Free Email Club!

If you appreciate this free information make sure to join the thousands of law abiding bikers that have already joined the free Email Club! You will be notified of new useful motorcycle content and techniques as we put them out. Join the Community now!

Video-Install Boss Audio Front Fairing Amplifier & Speakers on Harley Touring 1998 & Newer Street Glide, Road Glide, & Electra

By Leave a Comment

  • Install a Boss Audio Front Amp & Speakers on your 1998 & Newer Harley Davidson Street Glide, Road Glide, or Electra with stock stereo system to include the Boom Box Infotainment System yourself! 

  • Save money by not having a dealership do this project. 

  • Do it in your garage or driveway right on the kickstand!

  • Have the pure satisfaction of working on your own Harley!

  • Get great sound out of your stock stereo system with a Boss Audio Amp & Speakers.

  • Buy Boss Audio Speaker & Amplifier Kit in our Store Here!

A Video By Bikers for Bikers

 

This tutorial video will work for 1998 & newer Harley-Davidson Street Glide, Road Glide, or Electra with either a batwing or shark nose style fairings & equipped with a Harley stereo, including a Harley-Davidson Boom!™ Box Infotainment System. This video is for installing the Boss Audio front amp & speaker kit. This video covers every aspect of a front amp & speaker installation in great detail.

Boss Audio Kit Used in this Video

Items we used in this project: 

Boss Audio Amplifier & Front Speaker Kit:

  • Boss Audio BHD3F Kit
  • All wiring, harnesses, speaker grills, and amplifier plates are included in the kit

An easy to follow step-by-step tutorial video.

CHECK IT OUT!

GUARANTEE YOU CAN DO THIS!

CHECK THEM OUT!

See Other Useful For Purchase Videos

CHECK THEM OUT!

See Other Useful Free Videos

A Video by Biker for Bikers

This tutorial video will work for 1998 & newer Harley-Davidson Street Glide, Road Glide, or Electra models with either a batwing or shark nose style fairings & equipped with a stock Harley stereo, including the Harley-Davidson Boom!™ Box Infotainment System. This video is for installing the Boss Audio front amp & speakers.  This video covers every aspect of a front speaker & amp installation in great detail.

Note: With the Boss Audio front amp & speakers install you will need to “flash” or “re-program” your Boom!™ Box Infotainment System prior to or after installation. Flashing the Boom Box will allow it to recognize the new amp and speaker setup along with putting out the proper levels. Understand that Harley dealerships will no longer flash the Boom Box for you unless you purchase their Harley branded Boom Audio Stage speaker and amp kits. No worries though, because you can just find your nearest Techno Research Dealer and have it flashed. At the time of this video Boss Audio does not have its own download in Tecnho Research and in our video we show you which download to use for optimal sound! You can simply tell your Techno Research Dealer which download to use! We also show you how to adjust the amplifier settings for the best quality sound!

Save your money and do this project yourself right in your shop or garage right on the kickstand. No fancy motorcycle lifts, jacks, or tools are needed.

The video is very thorough and we show you different options for routing and managing wires. We explain what each component actually does and armed with this knowledge the project is a breeze.

As usual, the paper instructions provided by Boss Audio with the amp and speaker kit will confuse and frustrate you. That is where this video comes in, by breaking it down and showing you exactly how to do each step and why. You will watch in high definition and at the best possible angles. You will listen to actual bikers explain and show things in a way that is easy to understand. It is as if you are right there with us and can reach out and turn a wrench or plug in a wiring harness! This is a video by bikers for bikers. You simply won't find a better Boss Audio amp and speaker kit for Harley install tutorial video out there.

Boss Audio kit components we used in this video: 

  • Boss Audio BHD3F Kit
  • All wiring, harnesses, speaker grills, and amplifier plates are included in the kit

We suggest mounting your cell phone or music playing device to your handlebars or control cluster using a Biker Gripper. You will certainly want your music player mounted so you can get the most out of your new Bos Audio system.

As you can see, you don't need that much and can do this project right on the kickstand. So what are you waiting for? Don't waste your money by taking your Harley to a mechanic for this project.  Get the tutorial video now and get started! Have the satisfaction of working on your Harley and completing your own projects.

Crush Your Hand Fatigue! AIM Light Force Slave Clutch Cylinder For Harley-The Real Deal

By 11 Comments

AIM Light ForceIn this free tutorial video, we show you how to install an AIM Light Force Clutch Slave Cylinder on a Harley Davidson with a hydraulic clutch. AIM’s revolutionary Light Force Slave Cylinder provides a noticeable decrease in clutch lever pull. This will also bring your clutch friction zone closer to the grip, also widening the friction zone for easier clutch modulation. This heavy duty slave cylinder is made with a steel piston with upgraded seals, paired with a special surface treatment for super low friction to help further the longevity and the ease of operation of the slave cylinder.

Features:

  • Increased friction zone, while bringing the zone closer to the grip for easier clutch modulation.
  • Easier to pull clutch.
  • Black Anodized with special coating for high durability.
  • Uses factory hardware.
  • Installs behind the factory transmission end cover.
  • Direct bolt on, no modifications needed.

This product is meant to be used with all factory components. Factory grips, lever, factory & Screamin eagle clutch plate kit are highly recommended for proper operation of the Light Force Clutch.

The use of Harley Davidson Genuine Oils is highly recommended. i.e. Harley Davidson Premium DOT 4, Formula + (both primary & transmission)

Note: If you appreciate all the free content we put out and want to support us in our mission to help, educate, entertain, and inspire as many bikers as we can worldwide, please consider purchasing from the Law Abiding Biker Store!

Get Aim Force Clutch Slave Cylinder Here!

Fitment:
2014 ~ 2020 Touring, CVO Touring, Touring Police, Trike.
& 2017 Softail (Select Models Only FLSS, FLSTFBS, FXSE)

Join the Free Email Club!

If you appreciate this free information make sure to join the thousands of law abiding bikers that have already joined the free Email Club! You will be notified of new useful motorcycle content and techniques as we put them out. Join the Community now!

Install Ciro TAC 10 Light Cannons on a Harley-Davidson

By 4 Comments

Ciro Light CannonsThe TAC-10™ Light Cannons Street Glide/Electra Glide kit includes engineered brackets to allow easy bolt-on installation with adjustability that allows lights to angle up/down and side to side on '14-newer Street Glides and '19-newer Electra Glide Standards.  The brackets for the Street Glide/Electra Glide also have a tie town loop!

The TAC-10™ Light Cannons for Road Glide or 1 1/4″ Round Engine Guard kit includes 1 1/4″ bar mounts for easy installation with extended wiring to place the TAC-10 Lights anywhere on your engine guard!  

The TAC-10™ Light Cannons with Vision X Lighting technology feature 10-watt high-intensity LEDs that easily connect to your high beam wire (lights are on with high beam) or wire directly to keyed power (lights are on when in the ignition or accessory switch position).

Optional switch – not required 

A third power option is to install the available Evil Iron Customs Single Switch which allows you to turn off the TAC-10™ Light Cannons when in the ignition and accessory switch position (keyed power). This would save battery power when in the accessory switch position. 

Note: If you appreciate all the free content we put out and want to support us in our mission to help, educate, entertain, and inspire as many bikers as we can worldwide, please consider purchasing from the Law Abiding Biker Store!

Fits ‘14-up touring models

Fitment for Street Glide/Electra Glide Fairing – Full Kit 

    • Street Glide FLHX
    • Street Glide Special FLHXS
    • Street Glide ST FLHXST
    • ‘19-up Electra Glide Standard FLHT

Fitment for Road Glide – 1 1/4″ Bar Mount – Full Kit 

  • Fits 1 1/4″ engine Guard
    • Road Glide FLTRX
    • Road Glide Special FLTRXS


Join the Free Email Club!

If you appreciate this free information make sure to join the thousands of law abiding bikers that have already joined the free Email Club! You will be notified of new useful motorcycle content and techniques as we put them out. Join the Community now!

How to Install Ciro 3D Fang LED Headlight Bezel for Harley Batwing Fairing

By 2 Comments

Ciro Fang LED Headlight BezelIn this completely free tutorial video, we show how to properly install a Ciro Fang LED Headlight Bezel on a Harley-Davidson 2014 to present Street Glide with batwing fairing.  We already have a video on how to install a Ciro Fang LED Headlight Bezel on a Harley touring with a shark nose fairing.

If you appreciate all the free content we put out, please consider supporting us by purchasing Ciro products in the Law Abiding Biker Store. Thanks in advance. 

The Ciro Fang LED Headlight Bezel replaces the large empty gap around your headlight on your batwing fairing model with bright white LED running lights and amber turn signals set in a very clean housing. The bezel simply fills that gap and is plug-and-play. 

These Ciro 3D LED Fang LED Headlight Bezel has standard white running lights when riding down the road and they flash amber when you activate your signals. This makes you much more visible to all the distracted motorists out there, lessening your chance of being involved in an accident. 

The LED Headlight Bezel comes in black or chrome. There is also a model with the white lights only and no amber turn signals. 

This is another high-quality product by Ciro and it is plug and play for a super clean installation. We'll show you what you need to know for installation in this video.

Join the Free Email Club!

If you appreciate this free information make sure to join the thousands of law abiding bikers that have already joined the free Email Club! You will be notified of new useful motorcycle content and techniques as we put them out. Join the Community now!

How to Install Ciro 3D Fang LED Headlight Bezel for Harley Road Glide Shark Nose Fairing

By 2 Comments

Ciro Headlight BezelIn this completely free tutorial video, we show how to properly install a Ciro 3D Fang LED Headlight Bezel on a Harley-Davidson 2015 to present touring model.  We already have a video on how to install a Ciro 3D Fang LED Headlight Bezel on a Harley touring with a batwing fairing. 

If you appreciate all the free content we put out, please consider supporting us by purchasing Ciro 3D products in the Law Abiding Biker Store. Thanks in advance. 

The Ciro Fang LED Headlight Bezels replace the dull black plastic on both sides of your headlight on your Harley Road Glide with bright white LED running lights and amber turn signals set in a very clean housing. The bezels simply bolts to where you've removed the stock trim and plugs in with the included wiring harness for a quick and easy installation.

These Ciro 3D LED Fang LED Headlight Bezels are standard white running lights when riding down the road and flash amber when you activate your signals. This makes you much more visible to all the distracted motorists out there, lessening your chance of being involved in an accident. 

The LED Headlight Bezels come in black or chrome and with red or smoked lenses. 

This is another high-quality product by Ciro 3D and it is plug and play for a super clean installation. We'll show you what you need to know for installation in this video and also show you how to wire additional Ciro 3D rear lighting products to your Harley. 

Join the Free Email Club!

If you appreciate this free information make sure to join the thousands of law abiding bikers that have already joined the free Email Club! You will be notified of new useful motorcycle content and techniques as we put them out. Join the Community now!

Helping and connecting as many bikers as we can worldwide!

Ryan Urlacher | Owner/Founder

Biker, Podcaster, Filmmaker, Blogger, & Entrepreneur.

Get Connected!

Sponsorship & Affiliate